8e6 Technologies ERS-100 (5K02-51), ER3-100 (5K02-55), ER3-200 (5K02-56) The Boot Up Process

D.Drop down the face plate and press the large button to power on the ER. The boot- up process may take 5 - 10 minutes. When the drive light remains off for 30 seconds, the system is booted up.

WARNING: The ER is an information database. If you experience a power inter- ruption or power off the ER in any manner other than from the Web-based interface utility described in the sub-step Physically Connect the ER to the Network, you may lose data and/or damage the file system.

The Boot Up Process

The boot-up process may take 5 - 10 minutes. When the drive light remains off for 30 seconds, the system is booted up. (See the Non-“H” Server Specifications section and the “H” Server Specifications section for a description of front panel LED indicators and buttons.)

If you wish to verify that the unit has been booted up, you can perform the following test on your workstation:

1.Go to your taskbar and click Start > Run.

2.In the dialog box, type in cmd (type in command if using Windows ME).

3.Click OK.

4.In the cmd.exe window, type in ping 1.2.3.4

5.Press Enter on your keyboard.

If you receive a reply, the unit is up.

8e6 Enterprise Reporter Quick Start Guide 31