3.Enter a server value in the "Pickup Parked Call" field.
Note: For values to enter in this field, see the table "Park/Pickup Call Server Config- uration Values" on page 47.
4.Click to save your changes.
5.Click on Operation->Reset.
6.In the "Restart Phone" field click
to restart the IP phone.
Park/Pickup Softkey Configuration
The programmable method of configuration creates park and pickup softkeys that you can configure on the 57i phone.
You can set a softkey as "Park" or "Pickup" and then:
•specify a customized label to display on the Phone UI
•specify a value
•specify which line to use
•specify the state of the park and/or pickup keys
On the IP phone UI, the Park/Pickup feature displays the following:
•When a call comes in, and you pickup the handset, the custom label that you configured for the Park softkey displays on the Phone UI.
•After the call is parked, the label that you configured for the Pickup soft- key displays on other phones in the network. You can then press the "Pickup" softkey, followed by the applicable value to pickup the call on another phone in your network.
You can configure a Park and Pickup programmable configuration using the Aastra Web UI.
Softkey Configuration Using the Aastra Web UI
On the 57i, you configure a Park and/or Pickup key at
Note: Applicable values depend on the server in your network (Asterisk, Broad- Works, Sylantro, ININ PBX. See the table "Park/Pickup Call Server Configu- ration Values" on page 47.
Softkeys
Model 57i IP Phone User Guide | 49 |