Softkeys as an Empty Key

You can set a softkey to force a blank entry on the IP phone display for a specific softkey. You do this by setting the softkey to "empty". The soft keys are added in order (from softkey1 to softkey20) after any hard-coded keys have been added. If a particular soft key is not defined, it is ignored.

Setting an EmptySoftkey

Aastra Web UI

Use the following procedure to configure an Empty softkey on the 57i phone.

1. Click on Operation->Softkeys and XML.

2.Click on the Bottom tab or the Top tab.

3.Select from "Key 1" through "Key 20" on the bottom tab. or

Select from "Key 1" through "Key 10" on the top tab.

4.In the "Type" field, select Empty.

5.If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

6.Click to save your changes.

7.Click on Operation->Reset.

8.In the "Restart Phone" field click to restart the IP phone.

Softkeys

Model 57i IP Phone User Guide

63

Page 71
Image 71
Aastra Telecom 57i IP Phone manual Softkeys as an Empty Key, Setting an EmptySoftkey