10.Feed each distribution cable into the appropriate conduit section and route to the splice enclosure (not provided). Any excess cable slack may be stored in the bottom of the FMS.
Note: A separate splice enclosure (not provided) is required for splicing the cabinet OSP distribution cables to the system OSP distribution cables. If preferred, the splice enclosure for the distribution cables may be mounted within the
11.Lower the cabinet onto the ground spacer or adapter cover and align the mounting holes in the bottom of the cabinet with the holes in the cover.
12.If the installation includes a ground spacer, secure the cabinet to the spacer using the four hex bolts, four flat washers and four nuts provided with the spacer. If the installation does not include a ground spacer, secure the cabinet to the adapter cover using the four capscrews, four lock washers, and four flat washers provided with the cabinet. Tighten all fasteners securely.
13.Install the FMS sleeve cover onto the FMS and secure using the two capscrews and washers provided with the cover. Tighten both capscrews securely.
Page 14
© 2004, ADC Telecommunications, Inc.