ADC ACE-142S/142V 9 CONNECTOR PANEL INSTALLATION

ADCP-96-015 • Issue 1 • July 2004

9 CONNECTOR PANEL INSTALLATION

The ACE-142S/142V cabinet can accommodate up to five 72-port connector panels which will provide a total of 360 distribution ports. If the cabinet is not pre-loaded with five connector panels, then additional connector panels and round splice trays may be installed as needed. Use the following procedure to install additional connector panels in the cabinet:

1.Position the connector panel in the next available mounting space within the cabinet as shown in Figure 34.

2.Secure the connector panel to the cabinet using the four machine screws provided.

19737-A

Figure 34. Connector Panel Installation

Page 42

© 2004, ADC Telecommunications, Inc.