ADCP-96-015 • Issue 1 • July 2004

10 SPLITTER MODULE INSTALLATION

The ACE-142S/142V cabinet can accommodate up to twelve 1x8 or 1x32 splitter modules. The cabinet can support a maximum of 360 output ports for distribution. Use the following procedure to install additional splitters in the cabinet:

1. Install the splitter module in the next available mounting position as shown in Figure 35.

Note: Install splitters in the order shown in Figure 35, beginning on the right side of the splitter compartment.

2.Route the splitter output fibers to the connector storage panel or to the designated customer port. Refer to Section 11 for the routing procedure.

3.Route the splitter input fiber to the designated splice tray at the back of the cabinet as shown in Figure 36. Up to 12 fibers may be spliced within each splice tray.

12

6

 

11

5

 

10

4

DETAIL DRAWING OF

9

3

SPLITTER MODULES

8

2

 

7

1

 

19636-A

Figure 35. Splitter Module Installation

Page 43

© 2004, ADC Telecommunications, Inc.