CABINET (FRONT)
HEX BOLTS, FLAT
WASHERS, AND
NUTS (4 PLACES)
| GROUND | |
CAPSCREWS, LOCK | SPACER | |
(ACCESSORY) | ||
WASHERS, AND FLAT | ||
| ||
WASHERS (4 PLACES) |
| |
CONCRETE |
| |
PAD |
| |
|
| PAD MOUNTING |
CABLE | FRAME (PMF) |
CONDUIT |
|
Figure 10. Mounting the
7.Using appropriate lifting equipment, hold the cabinet in position for mounting over the ground spacer or PMF.
8.Lower the cabinet onto the ground spacer or PMF and align the mounting holes in the cabinet base with the threaded holes in the spacer or PMF.
9.If the installation includes a ground spacer, secure the cabinet to the spacer using the four hex bolts, four flat washers and four nuts provided with the spacer. If the installation does not include a ground spacer, secure the cabinet to the PMF using the four hex bolts, lock flat washers, and four flat washers provided with the cabinet. Tighten all fasteners securely.
4.6.2Mounting theUse the following procedures to mount the
1.Remove the plastic plugs that are installed in the threaded corner holes of the PMF and clean off any concrete that may have adhered to the top of the PMF.
Page 19
© 2004, ADC Telecommunications, Inc.