Addlogix iDP-3410 user manual FF n, Details

iDP-3410 User’s Manual

Details

FF n

[Function]	n-line paper feed
[Code]	<0C>H n
[Range]	1 ≤ n ≤ 127
[Outline]	This command feeds the paper by n-lines. You can set n = 1 to 127 lines. If the print buffer
	contains the data, use of this command feeds the paper by n-lines after printing the data.
	Setting n = 0 does not feed the paper.
SO
[Function]	Specifying the double width character
[Code]	<0E>H
[Outline]	The data following this command is printed doubled in the horizontal direction. Double
	width characters remain valid until the double width character cancel command is entered,
	but they are also cancelled after they are printed one line. Note that the double width
	characters take up two ordinary characters worth of width.