Addlogix iDP-3410 user manual ESC ⁄ n data CR or LF

iDP-3410 User’s Manual

ESC "⁄" n "data" CR or LF

[Function]	Defining the message
[Code]	<1B>H <2F>H n "data" CR or LF
[Range]	1 ≤ n ≤ 10
[Outline]	This command can define up to a 50-byte message in one line. If the value of n is specified
	beyond the range, the data following n will be treated as the print data.
	Once the message is defined, it remains valid until it is redefined. The data should end with
	CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the subsequent data will be treated as
	the print data.
	Once the message is defined, it remains valid until it is redefined or the download deletion
	command (ESC DC2 n1 n2) is executed.
ESC "DC3" n
[Function]	Printing the message
[Code]	<1B>H <13>H n
[Range]	1 ≤ n ≤ 10
[Function]	This command prints a message. If the value of n is specified beyond the range, the message
	will not be printed.

ESC DC2 n1 n2

[Function]	Deleting the download character, message, bit image
[Code]	<1B>H <12>H n1 n2
[Range]	0	≤ n1≤ 3
	0	≤ n2	(Specify 0 at n1 = 0)
			(1 ≤ n2 ≤ 10 at n1 = 1)
			(32 ≤ n2 ≤ 224 at n1 = 2)
			(Specify 0 at n1 = 3)
[Outline]	This command deletes the downloaded characters, message, and bit image.
		n 1	Object Deleted

0All(Message, characters, bit image)

1Download message