iDP-3410 User’s Manual
ESC "U" n
[Function] | Specifying/Canceling the Unidirectional print mode |
[Code] | <1B>H <55>H |
[Range] | 0 ≤ n ≤ 255 |
[Outline] | This command selects/deselects unidirectional print. n is valid only for the least significant |
| bit. |
n
0
1
Function
Deselects
Selects
[Caution] | If unidirectional print is selected, the printer will print from the left to the right. When you |
| want to prevent horizontal shear in printing at high accuracy, specify unidirectional print with |
| this command. (Double height print, etc.) |
ESC "c" "5" n
[Function] | Selecting the panel switch enable/disable |
[Code] | <1B>H <63>H <35>H n |
[Range] | 0 ≤ n ≤ 255 |
[Outline] | This command enables/disables the panel switches. n is valid only for the least significant |
| bit. |
| Setting n = 1 disables the panel switches. |
| Setting n = 0 enables the panel switches. |
[Caution] | If the panel switches are disabled with this command, the LF switch will be disabled. |
| Therefore, the paper cannot be fed by the LF switch. |
