Addlogix iDP-3410 user manual 13.3 ESC/POS Commands Command List

iDP-3410 User’s Manual

GS ⁄ m

[Function]	Printing the download, bit image
[Code]	<1D>H <2F>H m
[Range]	0 ≤ m ≤ 255
[Outline]	This command prints the bit image saved in the number specified with m.
[Caution]	If the print buffer contains the data, this command will be ignored. If the bit image has not
	been saved in the specified number, this command will be ignored.
	Nothing is printed when m is other than 0,1,2 or 3.

13.3ESC/POS Commands

13.3.1 Command List

	Command	Function	Code	Page
1	HT	Horizontal tab	09H	105
2	LF	Printing and paper feed	0AH	105
3	CR	Printing	0DH	106
4	ESC " " n	Setting thr character right space	1BH 20H n	106
5	ESC ! n	Setting print mode batch	1BH 21H n	107
6	ESC % n	Specifying/Canceling the download character set	1BH 25H n	108
7	ESC & s n m	Defining the download character set	1BH 26H s n m	109
	[a[p] s × a]		×
			[a[p] a a] m-n+1
8	ESC ∗ m n1 n2	Specifying the bit image mode	1BH 2AH m n1 n2	110
	[d] n1 + 256 × n2		[d] n1 + 256×n2
9	ESC 2	Setting the 1/6-inch line feed rate	1BH 32H n	111
10	ESC 3 n	Setting the line feed width in minimum pitch	1BH 33H n	111