Addlogix iDP-3410 user manual ESC ∗ n1 n2, ESC − n, Esc

iDP-3410 User’s Manual

ESC "∗" n1 n2

[Function]	Specifying the bit image mode
[Code]	<1B>H <2A>H n1 n2
[Range]	1 ≤ n1 + 256 × n2 ≤ 378
[Outline]	This command allows printing in the bit image mode.
	256 and assume its quotient to be n2 and remainder
	horizontal dots will be n1 + 256 × n2.
	If the bit image data is entered beyond the dot positions
	will be discarded. Normal data processing is restored
	done in a single direction.

Divide the number of dots printed by to be n1. Therefore, the number of

printable in one line, the surplus data after bit image printing. Printing is

ESC "−" n

[Function]	Specifying/Canceling the underline
[Code]	<1B>H <2D>H n
[Outline]	This command selects/deselects an underline. The underline is selected at n = 1 and
	deselected at n = 0.
[Default]	n = 0
ESC "1"
[Function]	Setting the 1/9-inch line feed width
[Code]	<1B>H <31>H
[Outline]	This command sets the line feed width to 1/9 inch.
ESC "2"
[Function]	Setting the 2/9-inch line feed width
[Code]	<1B>H <32>H

[Outline] This command sets the line feed width to 2/9 inch.