ADIC manual Operation, Switches on the control cabinet

4 Operation

In the normal case the host sends the commands to the AML/J. The AMU is used by the operator for control purposes. The operator is responsible for the following tasks:

•Starting the AML/J

•Stopping the AML/J

•Handling the cartridges

You will find information on handling the cartridges under Inserting car- tridges on page 6-4 and Ejecting cartridges on page 6-5. In the case of equipment disturbances the operator can process the cartridges.

4.1Switches on the control cabinet

You will find several switches for switching the components on and off in the control cabinet. In addition to the switches on the front of the con- trol unit, a mains switch is located on the back of the control unit.

Figure 4-1: Control unit on page 4-1 shows a view of the front side of the control unit.

Main switch (S3)	"Control on" button
	(only for HICAP)

Figure 4-1: Control unit

The switches on the control unit are described in Table 4-1: .

4-1

March 31, 1999