5
Language Reference
SCPI Command Summary | 64 |
Calibration Commands | 66 |
Measure Commands | 67 |
Output Commands | 68 |
Source Commands | 69 |
Status Commands | 71 |
System Commands | 77 |
Trigger Commands | 79 |
This section gives the syntax and parameters for all the IEEE 488.2 SCPI Subsystem commands and Common commands used by the power supply. It is assumed that you are familiar with the material in chapter 4, which explains the terms, symbols, and syntactical structures used here and gives an introduction to programming. You should also be familiar with chapter 3, in order to understand how the power supply functions.
Subsystem commands are specific to functions. They can be a single command or a group of commands. The groups are comprised of commands that extend one or more levels below the root. The subsystem commands are arranged alphabetically according to the function they perform.
Common commands begin with an * and consist of three letters (command) or three letters and a ? (query). They are defined by the IEEE 488.2 standard to perform common interface functions. Common commands are grouped along with the subsystem commands according to the function they perform.
Series N5700 User’s Guide | 63 |