Chapter 3 Calibration Procedures
Error Messages
Error Messages
The following tables are abbreviated lists of error messages for the E3632A. The errors listed are the most likely errors to be encountered during calibration and adjustment. A more complete list of error messages and descriptions is contained in chapter 5 of the E3632A User's Guide.
System Error Messages
Error | Error Message |
|
|
|
|
Too many errors | |
|
|
501 | Isolator UART framing error |
|
|
502 | Isolator UART overrun error |
|
|
511 | |
|
|
512 | |
|
|
513 | |
|
|
514 | Command allowed only with |
|
|
521 | Input buffer overflow |
|
|
522 | Output buffer overflow |
|
|
550 | Command not allowed in local |
|
|
Self-Test Error Messages
Error | Error Message |
|
|
601 | Front panel does not respond |
|
|
602 | RAM read/write failed |
|
|
603 | A/D sync stuck |
|
|
604 | A/D slope convergence failed |
|
|
605 | Cannot calibrate rundown gain |
|
|
606 | Rundown gain out of range |
|
|
607 | Rundown too noisy |
|
|
608 | Serial configuration readback failed |
|
|
624 | Unable to sense line frequency |
|
|
625 | I/O processor does not respond |
|
|
626 | I/O processor failed |
|
|
630 | Fan test failed |
|
|
631 | System DAC test failed |
|
|
632 | Hardware test failed |
|
|
70