Agilent Technologies N9010A specifications Acpr Accuracya

DVB-T/H Measurement Application

N6153A, DVB-T/H Measurements Application

a.The Complementary Cumulative Distribution Function (CCDF) is a reformatting of a histogram of the power envelope. The width of the amplitude bins used by the histogram is the histogram resolution. The resolution of the CCDF will be the same as the width of those bins.

Description	Specifications	Supplemental Information
Adjacent Channel Power
Minimum power at RF Input;		–36 dBm (nominal)
0 to 55 °C
ACPR Accuracya		7.61 MHz noise bandwidth,
		method = IBW
Offset Freq
8 MHz	±0.94 dB	At ACPR –45 dBc with optimum
		mixer levelb

a.The accuracy of the Adjacent Channel Power Ratio will depend on the mixer drive level and whether the distortion products from the analyzer are coherent with those in the UUT. These specifications apply even in the worst case condition of coherent analyzer and UUT distortion products. For ACPR levels other than those in this specifications table, the optimum mixer drive level for accuracy is approximately –37 dBm – (ACPR/3), where the ACPR is given in (negative) decibels.

b.ACPR accuracy for this case is warranted when the input attenuator is set to give an average mixer level of –18 dBm.

Description	Specifications	Supplemental Information
Spectrum Emission Mask
8 MHz Integration BW
RBW = 3.9 kHz
4.2 MHz offset
Dynamic Range, relativeab	87.1 dB	94.2 dB (typical)
Sensitivity, absolutec	–105.5 dBm	–111.5 dBm (typical)
Accuracy
Relatived	±0.63 dB
Absolute
20 – 30°C	±1.05 dB
10 MHz offset
Dynamic Range, relative	89.4 dB	96.1 dB (typical)

Chapter 20 219