Agilent Technologies N9010A specifications N6156A, Dtmb Measurement Application, 234

DTMB Measurement Application

N6156A, DTMB Measurement Application

N6156A, DTMB Measurement Application

Description	Specifications	Supplemental Information
Channel Power		Input signal must not be bursted
8 MHz Integration BW
Minimum power at RF Input		–50 dBm (nominal)
Absolute Power Accuracya
20 to 30 °C		±0.27 dB (95th confidence)
	±0.94 dB
Measurement floor		–78.7 dBm

a.Absolute power accuracy includes all error sources for in-band signals except mismatch errors and repeatability due to incomplete averaging. It applies when the mixer level is high enough that measure- ment floor contribution is negligible.

Description	Specifications	Supplemental Information
Channel Power with Shoulder		Input signal must not be bursted
Attenuation View
7.56 MHz Integration BW
		ML = –14.57 dBm (nominal)
Dynamic Range, relativea
Offset Freq
4.2 MHz	87.1 dB	94.2 dB (typical)

a.The dynamic range specification is the ratio of the channel power to the power in the offset and region specified. The dynamic range depends on the measurement settings, such as peak power or integrated power. This specification is derived from other analyzer performance limitations such as third-order intermodulation, DANL and phase noise. Dynamic range specifications are based on default measure- ment settings, with detector set to average, and depend on the mixer level. Mixer level is defined to be the input power minus the input attenuation.

234 Chapter 22