Single Acquisition Combined WLAN Measurement Application
N9077A, Combined WLAN 802.11b or
Description | Specifications | Supplemental Information |
|
|
|
Absolute |
|
|
20 – 30°C | ±1.59 dB |
|
33 MHz offset |
|
|
Dynamic Range, relativef |
| 68.3 dB (nominal) |
Sensitivity, absolute |
| |
Accuracy |
|
|
Relative | ±0.68 dB |
|
Absolute |
|
|
20 – 30°C | ±1.60 dB |
|
|
|
|
a.The dynamic range specification is the ratio of the channel power to the power in the offset specified. The dynamic range depends on the measurement settings, such as peak power or integrated power. Dynamic range specifications are based on default measurement settings, with detector set to average, and depend on the mixer level. Default measurement settings include 100 kHz RBW.
b.This dynamic range specification applies for the optimum mixer level, which is about
c.The sensitivity is specified with 0 dB input attenuation. It represents the noise limitations of the ana- lyzer. It is tested without an input signal. The sensitivity at this offset is specified in the default 100 kHz RBW, at a center frequency of 1 GHz.
d.The relative accuracy is a measure of the ratio of the power at the offset to the main channel power. It applies for spectrum emission levels in the offsets that are well above the dynamic range limitation.
e.This dynamic range specification applies for the optimum mixer level, which is about
f.This dynamic range specification applies for the optimum mixer level, which is about
Description | Specifications | Supplemental Information |
|
|
|
CCK 11 Mbps (DSSS) |
|
|
MLa = |
| EQ Off |
20 to 30 °C |
| Reference Filter: Gaussian |
EVM |
|
|
Operating range |
| 0.1 to 20% (nominal) |
Floor |
| 1.54% (nominal) |
Accuracyb |
|
|
from 1% to 2% |
| ±0.9% (nominal) |
from 2% to 20% |
| ±0.40% (nominal) |
|
|
|
208 | Chapter 18 |
