Agilent Technologies N9010A specifications Other Analysis Bandwidth Specifications

Option B25 (25 MHz) - Analysis Bandwidth

Other Analysis Bandwidth Specifications

Other Analysis Bandwidth Specifications

	Description			Specification	Supplemental
					Information
IF Spurious Response, 25 MHz IF
Bandwidth (Option B25)a
		Mixer	IF		Preamp Offc
		Levelb	Gain
IF second harmonicd
Apparent	Excitation Freq.
Freq. (f)
Any on-screen f	(f + fc + 22.5 MHz)/2	−15 dBm	Low		−54 dBc (nominal)
		−25 dBm	High		−54 dBc (nominal)
IF conversion imagee
Apparent	Excitation Freq.
Freq. (f)
Any on-screen f	2 × fc − f + 45 MHz	−10 dBm	Low		−70 dBc (nominal)
		−20 dBm	High		−70 dBc (nominal)

a.To save test time, the levels of these spurs are not warranted. However, the relationship between the spurious response and its excitation is described so the user can distinguish whether a questionable response is due to these mechanisms or is subject to the specifications in “Spurious Responses” in the core specifications. f is the apparent frequency of the spurious, fc is the measurement center frequency.

b.Mixer Level = Input Level − Input Attenuation.

c.The spurious response specifications only apply with the preamp turned off. When the preamp is turned on, performance is nominally the same as long as the mixer level is interpreted to be: Mixer Level = Input Level − Input Attenuation − Preamp Gain

d.IF second harmonic significant only for Pre-FFT BW ≥10 MHz.

e.IF conversion image significant only for Pre-FFT BW ≥10 MHz.

Chapter 2 81