Extended Recording Monaural | Aiwa XR-H33MD instruction

6 Press the zMD REC button.

Unit enters the standby mode and waits until the remaining recordable time of the MD is displayed.

7 Press the button to start recording.

8 Press the button to stop recording.

When the recording finishes, TOC EDIT is displayed and the data concerning the contents of the recording are registered.

To add index marks during recording

Press the ENTER button at the desired point during recording.

NOTE

•There may be a case where marks are not registered accurately even if the Auto MARK is selected.

•You can not register index marks without registering track numbers.

To prevent accidental erasure of recorded material

Slide the record-protect tab as shown below.

Slide the tab so that it is completely locked.

If a recording is attempted when the tab is set to the protected position, "Protected" appears on the display. Slide the recording protect tab to the original position.


	MD RECORDING (cont)	pg. 23

EXTENDED RECORDING - MONAURAL

RECORDING

Twice as long as the time printed on the MD can be obtained by using the monaural recording mode. In this case,

Image 36

Aiwa XR-H33MD Extended Recording Monaural, Press the zMD REC button, To prevent accidental erasure of recorded material

Contents

XR-H33MD English pg Precautions InstallationElectric Power Owners record Table of Contents Radio Reception Check your system and accessories Before connecting the AC cordPreparations Connections Connect the supplied antennas Connect the AC cord to an AC outlet Remote Control When to replace batteriesTo use Shift on the remote control To use Function on the remote control Before Operation Audio Adjustments VolumeSound Super T-BASS System Manual Tuning Radio Reception Presetting Stations Preset Number Tuning Selecting a preset number on the main unitTo clear a preset station Repeat steps 1 To select a reverse mode deck 2 only Tape PlaybackBasic Operations Press Button to start play When tapes are loaded in both decks To start play when the power is off Direct Play FunctionContinuous Play To set the tape counter to About cassette tapes Loading Discs Playing DiscsTo play all discs in the disc compartment, press RANDOM/REPEAT Play Programmed Play Press the RANDOM/REPEAT button repeatedly To clear the program To add tracks to the programTo change the programmed tracks To play the programmed tracks repeatedly Press To select a track with the remote control To play a disc at double speedTo check the track title To check the disc titlePage Select the reverse mode Tape RecordingBasic Recording Preparation Use Type I normal tapes only Inserting Blank Spaces Dubbing a Tape Manually Dubbing the Whole Tape AI Edit Recording Press the Sync DUB button to start recordingInsert the tape into deck To stop the recording To clear the edit programTo check the order of the programmed track numbers To add tracks from other discs to the edit program Programmed Edit Recording MD Recording Recording a Whole CDPress zTAPE REC/REC Mute button to start recording To stop recording Display information during recording Registering index marks automatically Recording only ONE Track of a Auto First Tracks Recording CDSTo record on a previously recorded MD Programmed Recording of CDS Recording Three CDS CONTINUOUSLYz Within 10 seconds, press the Enter button Press zMD REC Press the to start recordingTo add index marks during recording Recording level Press the Mode button Recording from a TAPE, Radio or Connected EquipmentWithin 10 seconds, press the Enter button Extended Recording Monaural Press the zMD REC buttonTo prevent accidental erasure of recorded material Press Mode three times Extended Timer Recording Type of MDOptical discs Recordable MO*1 discs Quick random access Limitations of MDUltra compact size made possible by ATRAC*2 technology Track numbers may not be registered properly Enter a letter, number or symbol Registering the Disc Title Track TitleRegistering the Disc Title Registering the Track Titles Dividing a Track Press MD Edit repeatedly until Divide is displayed Within 10 seconds, press Enter Combining TWO Tracks Press MD Edit repeatedly until Combine is displayedIf the tracks are titled Changing the Order Tracks Erasing Tracks Erasing ALL Tracks on a DiscErasing a Single Track Within 1 minute, press the Enter button again Clock and Timer Setting the Clock Setting the Timer To switch to the 24-hour standardIf the clock display flashes Preparation Setting the Timer Recording Setting the Sleep Timer Connecting Optional Equipment Other ConnectionsVIDEO/AUX Jacks CD Digital OUT /MD Digital OUT Optical Jacks Digital in Optical Jack Listening to External SourcesTo Play Equipment Connected to the VIDEO/AUX Jacks Care and Maintenance To Play Equipment Connected to the Digital in JackGeneral Specifications Care of tapesCare of MDs Main unit CX-NH33MD Speaker system SX-NH33 Troubleshooting Guide Tuner Section Cassette Deck Section CD Player SectionMD Recorder Section To reset Parts Index