Before Operation | Aiwa XR-H33MD specs

NOTE

•If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

•The remote control may not operate correctly when:

-The line of sight between the remote control and the remote sensor on the bottom of the front panel (see the illustration of "BEFORE OPERATION") is exposed to intense light, such as direct sunlight.

-Other remote controls are used nearby (television, etc.)

BEFORE OPERATION

To turn the unit on

Press one of the function buttons (TAPE, TUNER, AUX/D-IN, CD, MD).

Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function). POWER button is also available.

When the unit is turned on, the disc compartment may open and close to reset the unit.

To turn the unit off

Press POWER.

DEMO (Demonstration) mode

When the AC cord is connected for the first time, the display window demonstrates the functions of the unit. When the power is turned on, the DEMO display is overridden by the operation display. When the power is turned off, the DEMO mode is restored.

To cancel DEMO mode

Press SET during DEMO display. The clock display appears. (To set the current time, see "SETTING THE

CLOCK" on page 29.) To activate the DEMO mode, press .

Flash windows

The windows on the top of the unit and the MD drive light up or flash while the unit is being powered on.

To turn off the light of the top window, press the button while pressing CD. To turn back on, repeat the above.

To turn off the light of the MD drive, press while pressing MD. To turn back on, repeat the above.

Image 8

Aiwa XR-H33MD user service Before Operation

Contents

XR-H33MD English pg Precautions InstallationElectric Power Owners record Table of Contents Radio Reception Check your system and accessories Before connecting the AC cordPreparations Connections Connect the supplied antennas Connect the AC cord to an AC outlet Remote Control When to replace batteriesTo use Shift on the remote control To use Function on the remote control Before Operation Audio Adjustments VolumeSound Super T-BASS System Manual Tuning Radio Reception Presetting Stations Preset Number Tuning Selecting a preset number on the main unitTo clear a preset station Repeat steps 1 To select a reverse mode deck 2 only Tape PlaybackBasic Operations Press Button to start play When tapes are loaded in both decks To start play when the power is off Direct Play FunctionContinuous Play To set the tape counter to About cassette tapes To play all discs in the disc compartment, press Loading DiscsPlaying Discs RANDOM/REPEAT Play Programmed Play Press the RANDOM/REPEAT button repeatedly To clear the program To add tracks to the programTo change the programmed tracks To play the programmed tracks repeatedly Press To select a track with the remote control To play a disc at double speedTo check the track title To check the disc titlePage Select the reverse mode Tape RecordingBasic Recording Preparation Use Type I normal tapes only Inserting Blank Spaces Dubbing a Tape Manually Dubbing the Whole Tape Insert the tape into deck AI Edit RecordingPress the Sync DUB button to start recording To stop the recording To clear the edit programTo check the order of the programmed track numbers To add tracks from other discs to the edit program Programmed Edit Recording MD Recording Recording a Whole CDPress zTAPE REC/REC Mute button to start recording To stop recording Display information during recording Registering index marks automatically To record on a previously recorded MD Recording only ONE Track of aAuto First Tracks Recording CDS Programmed Recording of CDS Recording Three CDS CONTINUOUSLYz Within 10 seconds, press the Enter button Press zMD REC Press the to start recordingTo add index marks during recording Recording level Within 10 seconds, press the Enter button Press the Mode buttonRecording from a TAPE, Radio or Connected Equipment To prevent accidental erasure of recorded material Extended Recording MonauralPress the zMD REC button Press Mode three times Extended Timer Recording Type of MDOptical discs Recordable MO*1 discs Quick random access Limitations of MDUltra compact size made possible by ATRAC*2 technology Track numbers may not be registered properly Registering the Disc Title Enter a letter, number or symbolRegistering the Disc Title Track Title Registering the Track Titles Dividing a Track Press MD Edit repeatedly until Divide is displayed Within 10 seconds, press Enter If the tracks are titled Combining TWO TracksPress MD Edit repeatedly until Combine is displayed Changing the Order Tracks Erasing Tracks Erasing ALL Tracks on a DiscErasing a Single Track Within 1 minute, press the Enter button again Clock and Timer Setting the Clock Setting the Timer To switch to the 24-hour standardIf the clock display flashes Preparation Setting the Timer Recording Setting the Sleep Timer Connecting Optional Equipment Other ConnectionsVIDEO/AUX Jacks CD Digital OUT /MD Digital OUT Optical Jacks To Play Equipment Connected to the VIDEO/AUX Jacks Digital in Optical JackListening to External Sources General Care and MaintenanceTo Play Equipment Connected to the Digital in Jack Specifications Care of tapesCare of MDs Main unit CX-NH33MD Speaker system SX-NH33 Troubleshooting Guide Tuner Section MD Recorder Section Cassette Deck SectionCD Player Section To reset Parts Index