Aiwa Z-VR55 3,7,8,9, Press CD and load the discs 3 Press EDIT/CIHECK twice, the tracks for side B

3,7,8,9

5

4

2

■

In the F’rogrammed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.

1 Insert the tape into Deck 1.

Insert the tape with the side to be recorded on first facing out from the unit, and wind up the tape with -.

2Press CD and load the disc(s).

3Press EDIT/CIHECK twice.

“ED1-~and “PRGM”are displayed.

●When “Al”is dispiayed, press EDIT/CHECK again.

4 Press numbered buttons on the remote control to designate the tape length.

10 to 99 minutes can be specified.

●*I, * or MULTI JOG are also available to designate the tape length.

	Tape side A	Maximum recording
Tape length	(front side)	time for side A

5 Press DIRECr, then press one of the numbered buttons 1 to U within 3 seconds to select a disc. Then, press numbered buttons O-9 and +10 on the remote ccmtrol to program a track.

Example: To select the 10th track of disc 2, press DIRECT and :2,then pres:s +10 and O.

Selected	disc	Remaining time on side A
number	Program number

Selected track number Programmed track number

6Repeat step 5 for the rest of the tracks for side c1 A.

A track whose playing time is longer than the remaining time	“:f:”’
cannot be programmed.	;#j”

7 Press EDIT/CHECK to select side B and program ‘,x’

the tracks for side B.	w
Tape side B (reverse side)

8Press EDIT/CHECK to select side A and press ● on Deck 1.

~ flashes for 10 seconds, and then CD play and recording of edited tracks for the first side start simultaneously. When the end of the tape is reached, Deck 1 enters the recording stop mode. After entering the recordings top mode, go to step 9.

9Press EDIT/CHECK for recording of the second side.

“B”is displayed.

10 Turn over the tape in Deck 1 and press ● to start recording.

Recording starts.

To stop recording

Press W= on Deck 1. Recording and CD play stop ❑ simultaneously.

To check the order of the programmed track numbers Before recording, press EDITICHECK on the remote control to

select side A or B, and press ++ or > repeatedly.

Disc number Program number

I

Track number Programmed track numbers

To change the program of each side

Press EDIT/CHECK on the remote control to select side A or B, and press WCLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ■CLEAR twice in stop mode so that “EDIT disappears on the display.

m

Up to 30 tracks can be programmed from any of the inserted discs.

ENGLISH 14