Aiwa Z-VR55 manual Positioning The Speakers, u -’j, ~ Front speakers @ Center speaker

The DOLBY PRO LOGIC system which is the biggest feature of this stereo system provides you with multichannel sound in your home.

Complete setting and connection of the main unit, supplied speakers, yourTV and video equipment according to the following procedure.

,,,,$,:#-Z#.!,,,!"~#':#,,,?l#''#B",,#%?,~~:=&&*,. ..-—.Z.*:-F~',d.!~

5’$9E%$s8= .QIPP!M.W:I - . A ia.=%.-.,. . ‘:1$.4 .- !:.s bs!!‘R-88*S - ‘ -:

POSITIONING THE SPEAKERS

To achieve the optimum effects obtainable with the DOLBY PRO LOGIC system, it is important to position the speakers properly. Refer to the following illustration to find out the best location in your room.

~Front speakers

@Center speaker

Position inthecenter of thetwo front speakers. In addition, position on or below the TV set, if connecting a TV set to the unit.

@Surround speakers

Place the surround speakers directly to the side of or slightly behind the listening area. Align them horizontally, about 1 meter above ear height.

●No sound is heard from the center and surround speakers when the DOLBY PRO LOGIC the DSP SURROUND system and the 5.1 CH (page 20) are set to off.

●The sound is heard from the center speaker when the DOLBY PRO LOGIC or the 5.1 CH (page 20) is set to on.

Check the AC voltage

The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage.

IMPORTANT

Connect the speakers, antennas, and all optional equipment first. Then connect the AC cord in the end.

Speakers

There are no difference between the front speakers as well as the surround speakers. Both speakers of its kind can be connected as L (left) or R (right).

2 Surround speaker 2 Surround speaker

	3	Center speaker	AM antenna
		~6		FM antenna
		\
	5	Q.		-T
1		II	Main	unit	1
	I
Front speaker(R)			‘1	Front	speaker(L)
		Television

‘-_

Speaker cord

~

~

u -’j,

AC -+7 cord

~ENGLISH