Aiwa Z-VR55 manual RADiO RECEPTION 1 Press TUNER/13AND to select the FM or AM band

RADiO RECEPTION

1 Press TUNER/13AND to select the FM or AM band.

When TUNER/BAN13 is pressed while the power is off, the power is turned on directly (Direct Play Function).

2 Press TUNER PRESET repeatedly to select the manual tuning mode.

Each time the bulton is pressed, the following three tuning modes are select~!d cyclically.

@Preset tuning mode: The preset number flashes.

@Auto search mode: “SEARCH”is displayed.

@Manual tuning mode: “SEARCH” is not displayed and the preset number does not flash.

Frequency SEARCH Preset number

II

The preset tuning mode is skipped if no station is preset.

3 Turn MULTI JC)G clockwise or counterclockwise to tune in to a station.

The frequency changes as you turn MULTI JOG. When a station is receivecl, “TUNE is displayed for 2 seconds. During FM stereo reception, [11~111is displayed.

(((q]])

. -DOWNant{ -UP are also available to tune in to a station.

To search for a station quickly (Auto Search)

Press TUNER PRESET repeatedly to display“SEARCl+’’(auto search mode), and turn MULTI JOG clockwise or counterclockwise until the frequency starts to change rapidly. After tuning in to a station, the search stops.

SEARCH

I

To stop the Auto Search manually, turn MULTI JOG a little in either direction.

●The Auto Search may not stop at the stations with very weak signals.

●H DOWN and W UP are also available to search for a station. Kee~ H DOWN or - UP pressed until the tuner starts searching. Press the button to stop the search manually.

When an FM stereo broadcast contains noise

Press REPEAT/MONO TUNER on the remote control so that “MONO appears on the display.

Noise is reduced, although reception is monaural.

MONO

To restore stereo reception, press REPEAT/MONO TUNER on the remote control so that “MONO disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If

you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing TUNER/BAND on the unit.

To reset the interval, repeat this procedure.

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

ENGLISH 8