POINT TO POINT SERVICE
If your service provider is providing point to point (PPP) service, your ADSL modem should have model number 3EC 18202 BB or 3EC 18202 DB on the bottom of the modem case.
System Requirements
The Alcatel 1000 ADSL high speed modem requires a PC or workstation equipped with the following:
1.Ethernet
2.Operating system such as Windows 95, Windows 98, or Windows NT (see note)
3.Microsoft Virtual Private network (VPN) Adapter
Note:
If you have an operating system other than Windows 95, Windows 98, or Windows NT, contact your service provider for additional system requirements.
PPP service requires a user account to the service provider of your choice.
Hardware Installation
To connect your high speed ADSL modem, follow these steps:
1.Make sure the modem on/off switch is set to the O (off) position.
2.Connect the jack end of the power cable to the modem power socket.
3.Plug the other end of the power cable (the end with the power supply adapter) to an electrical outlet.
4.Connect one end of a standard telephone cable (not provided) to the modem connector labeled LINE.
Note:
The line cable may be provided by your service provider during installation, or it can be purchased at your local electronics supply store.
5.Connect the other end of the line cable to a phone jack.
