Figure 13. Configure Port Usage Window
15.Select the
16.Perform steps 14 and 15 for each port (if required), then proceed with step 17.
17.To define which tunneled protocols you will allow through the VPNs, highlight each port and click Network. Then, in the Network Configuration Window, enable or disable the protocols you want and click OK.
Note:
You can enable or disable IP, IPX, or NetBEUI sessions for each port.
18.Click Continue.
19.Click Close. The system prompts you to restart the server.
20.Click Yes to restart.
Configure the Connection
The following procedure describes how to configure a connection to the corporate network or ISP. A connection contains the IP address of a PPP server and your user account information on that server. You can configure as many connections as you need for different accounts or different PPP servers.
