handled by the backup package you have installed instead.
4. Click submit.
Setting the Magazines
This setting is used to report the number of storage elements and the element address to the SCSI host. This setting must match the physical configuration in order for correct information to be reported. This setting only affects the information reported to the SCSI host. This setting does not affect the access to magazine slots from the front panel or the Remote Management Unit. Those interfaces are based on the physical configuration.
NOTE: The default setting of Left must be reconfigured if the optional right magazine is installed. Host backup software may also require reconfiguration if the loader was originally installed with only the default left magazine
When configured for Both magazines, the autoloader always reports 16 storage elements to the SCSI host. This allows the removal and reinstallation of magazines without affecting what is reported to the host. When configured for Left or Right, the autoloader will always report 8 storage elements to the SCSI host.
The element addresses vary depending on which magazine is configured. If Left or Right is selected, and both magazines are physically installed, the front panel and the Remote Management Unit allow the user access to the other magazine, but the SCSI host will not have access.
To set the Magazines option:
1.From any page, click the Configuration heading. The Configuration screen displays.
2.Scroll to Magazines. The Magazines options display.
A radio button appears after the currently enabled mode.
3.Do one of the following:
¡To leave the Magazines mode unchanged, press Esc.
¡To change the Magazines configuration, scroll to the setting you want for the autoloader, selecting the appropriate check box, and then click submit. These settings include Both, Right, and Left.
The message This will require a power cycle and host backup software configuration change. Enter To Continue is displayed.
¡To continue with the change, press submit. The message Please power cycle the tape autoloader and reconfigure the host backup software app. displays.
Setting the System Time
The system time is displayed by the Remote Management Unit and it is used internally for logging events and errors (see "Setting the Time").
The autoloader must be reset after each power up. The time can be reset automatically if a time server is configured (see "Setting Network Options"). Otherwise, the time must be set manually from the front panel or through the Remote Management Unit. The time zone setting is not lost when powered off.
NOTE: Whether the autoloader is connected to a time server or not, if you want to include time changes for daylight savings time, you must change the time zone manually.
To set the system time:
1.Using the first
NOTE: For example, if you live in Colorado, the time difference is
2.Below the Time Zone field, select the current Month from the
3.In the Day field, type the current day of the month.
4.In the Year field, type the current year.
5.In the Hour text box, type the current hour in
6.In the Minute text box, type the current minute.
7.Click submit to save the information.
Setting Network Options
When you originally installed the autoloader, you set the Ethernet configurations through the front LCD panel. However, you can modify them through the Remote Management Unit. The options include Current Network Parameters, Set IP, and Set Network Configuration. To change the Ethernet configurations:
To view the Current Network Parameters:
1.From any page, click the Configuration heading. The Configuration screen displays.
2.From the Configuration menu, click Networking.
The Current Network Parameters area displays the current IP address, MAC address, and the speed setting for the Ethernet connection.
In the Set IP section, if a check mark appears in the box next to DHCP, the dynamic IP address option is enabled. This means that with every reset of the
