E9

Time Update Event

The system time was changed. No action required.

Front Panel Error Types

 

 

 

 

 

EA

LCD Busy Error

Possible LCD controller problem, software error, or communication error.

 

 

Power cycle the autoloader.

 

 

Run the Random Moves test.

EB

LCD Goto Error

 

 

 

 

If all previous steps fail, contact support.dell.com.

 

 

 

EC

Login/Password Error

Incorrect login from front panel.

 

 

Use correct login/password.

ED

Socket Error During SNTP

 

 

 

 

 

 

Barcode Error Types

 

 

 

 

 

 

F0

Bar Code Init Error

Remove magazines and inspect cartridges. Verify that valid barcode labels are being used on all

 

 

 

cartridges, and re-insert the magazines.

 

 

 

 

F1

Bar Code Hardware Error

If barcode labels are not being used, disable the barcode reader through the Operator Control Panel

 

 

 

 

 

or Remote Management Unit.

F2

Bar Code Baud Rate Error

 

 

 

 

 

Run the Random Moves test from either the Remote Management Unit (RMU) or the Operator Control

F3

Bar Code Handshake Error

 

Panel (OCP).

 

 

 

 

 

Note: The Random Moves test requires a minimum of two cartridges present within the autoloader.

F4

Bad/Noisy Response From Bar

 

 

 

Code Reader

If all previous steps fail, contact support.dell.com.

 

 

 

F5

Checksum Failed

Incomplete barcode label or barcode checksum failed.

 

 

Repeat test with new cartridge or label.

 

 

If problems recur with the original cartridge or label, replace.

 

 

If all previous steps fail, contact support.dell.com.

 

 

 

F6

Barcode No Read

Barcode label not present.

 

 

Apply valid barcode label to cartridge, or disable the barcode reader through the Operator Control

 

 

 

Panel or Remote Management Unit.

 

 

 

 

F7

Barcode Mismatch Error

Power cycle the autoloader.

 

 

Run the Random Moves test from either the Remote Management Unit (RMU) or the Operator Control

 

 

 

Panel (OCP).

 

 

 

Note: The Random Moves test requires a minimum of two cartridges present within the autoloader.

 

 

If all previous steps fail, contact support.dell.com.

 

 

 

F8

Barcode Duplicate Label Error

Duplicate barcode.

 

 

 

 

Diagnostic Error Types

 

 

 

 

 

 

F9

Diagnostic Test Failure

Power cycle the autoloader.

 

 

Re-run the failing diagnostic test.

 

 

If all previous steps fail, contact support.dell.com.

 

 

 

 

FA

Diagnostic Error, Drive

Verify that valid, not data protected media is present for test.

 

Reporting Write Protect

 

 

 

 

Run the Random Moves test from either the Remote Management Unit (RMU) or the Operator Control

 

 

 

Panel (OCP).

 

 

 

Note: The Random Moves test requires a minimum of two cartridges present within the autoloader.

FB

Diagnostic Error, Cleaning Tape

 

 

Inserted

 

 

 

 

If all previous steps fail, contact support.dell.com.

 

 

 

FC

Diagnostic Load Tape Prompt

This is a prompt to manually load a cartridge as required for test.

 

 

 

 

FD

Diagnostic Unknown Tape

Verify that valid, not data protected media is present for test.

 

Format

 

 

 

 

Run the Random Moves test from either the Remote Management Unit (RMU) or the Operator Control

 

 

 

Panel (OCP).

 

 

 

Note: The Random Moves test requires a minimum of two cartridges present within the autoloader.

 

 

If all previous steps fail, contact support.dell.com.

 

 

 

FE

Diagnostic Invalid Configuration

This is an indication that a minimum of two pieces of media are required for test.

 

 

Insure at least two cartridges are present in the autoloader and re-run the failed test.

Page 50
Image 50
Dell 124T LTO-3 technical specifications Front Panel Error Types, Barcode Error Types, Diagnostic Error Types