Alcatel Carrier Internetworking Solutions 1000 ADSL manual Accessing Online Services

6.Connect one end of the Alcatel Data Cable (provided) to the modem connector labeled 10BASE-T.

7.Connect the other end of the Alcatel Data Cable to the Ethernet 10Base-T network adapter card in your PC.

8.Start your PC.

9.Click Start, Settings, Control Panel, and finally, the Network icon.

10.Click the Configuration tab.

11.Scroll down to the TCP/IP protocol adapters, find the adapter which includes the name of your Ethernet card, and select it.

12.Click the Properties button.

13.When the TCP/IP Properties window appears, click the IP Address tab.

14.Press the Specify IP address radio button, and enter the IP address and subnet mask assigned to you by your service provider.

15.Restart your PC.

16.Turn on the modem by switching the on/off switch to .

Power/Sync Light

The Power/Sync light begins blinking. After about two minutes, the light should be solid green. If the light is not solid green, check the telephone line cable between the modem LINE connector and the phone jack. If this connection is secure and the Power/Sync light is not solid green, contact your service provider for assistance.

10BASE-T Light

The 10BASE-T light should be solid green. If the light is not solid green, check the Alcatel Data Cable connection between the modem 10BASE-T connector and the Ethernet 10Base-T network adapter card in your PC. If this connection is secure and the 10BASE-T light is not solid green, contact your service provider for assistance.

Accessing Online Services

To access online services, you must dial-up your service provider. The procedure to use depends on the operating system of your PC. Procedures are provided for Windows 95, Windows 98, and Windows NT.