Advanced PPP/PPTP Configuration

This page contains the PPTP Connection table. It provides a more detailed listing of PPP/PPTP connections and configuration information (figure 42).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Channel

 

Name

 

VPI

 

VCI

 

Encap

 

HDLC

 

State

 

 

ID

 

 

 

 

 

framing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

ISP1

 

8

 

67

 

VCMUX

 

keep

 

IDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

ISP1

 

8

 

75

 

VCMUX

 

never

 

IDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

ISP1

 

8

 

83

 

VCMUX

 

never

 

IDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

ISP1

 

8

 

91

 

VCMUX

 

never

 

IDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

ISP2

 

8

 

99

 

VCMUX

 

never

 

IDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

ISP2

 

8

 

107

 

VCMUX

 

never

 

IDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

ISP2

 

8

 

115

 

VCMUX

 

never

 

IDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 42. PPTP Destination Table

The additional columns provided in this table are described next.

VPI/VCI

VPI and VCI values identify an ATM virtual connection. Because the modem comes with preconfigured VPI/VCI values, you do not have to configure these fields.

However, if the ISP or corporate network administrator requires VPI/VCI values different from the default values, you must enter those values in these fields.

Encap

This field indicates the encapsulation of Ethernet or IEEE 802.3 frames to AAL5/ATM protocol.

The ADSL modem supports both the LLC/NLPID method and the VC MUX method for bridged Ethernet V2.0/IEEE 802.3 PDUs. By default, this field is set to LLC/NLPID, and the access server of the ISP or corporate network must use the same method. If it does not, contact the ISP or corporate network administrator.

Page 71
Image 71
Alcatel Carrier Internetworking Solutions 1000 ADSL manual Advanced PPP/PPTP Configuration, Hdlc