Alesis QSR 64 manual Copying Effects

Editing Programs: Chapter 6

COPYING EFFECTS

While editing a Program, it is helpful to be able to copy the Effects Patch from a different Program. This can be done very easily from within the Store function.

✪Be sure to save your changes to the current edited Program before going to a new Program. Otherwise, all your changes will be lost.

To copy the Effects Patch from a Program to another Program:

➀Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select the Program Number that uses the Effects you want to copy. If necessary, use the BANK SELECT [DOWN] and [UP] buttons to select a different Bank.

➁Press [STORE].

The [STORE] button will begin to flash.

➂Press [CURSOR ▲] three times to advance to Page 3.

The upper section of the display will read:

COPY EFFECT	TO
PROG 000	(STR)

➃Use the [VALUE] knob to select the Effects Patch of the currently selected Program, or any Program (000 - 127) in the User Bank to copy from.

➄Press [CURSOR ▲] once to advance the cursor to the Program number value in the lower section of the display.

➅Turn the [VALUE] knob to select the Program Number in the User Bank you wish to copy the Effects to (000–127), or the EFFECT of the currently selected Program.

➆Press [STORE] to complete the copy function.

QSR Reference Manual 41