Alesis QSR 64 manual Sequence Playback, Play CardA Seq01 Store

MIDI Transfer and Storage Operations: Chapter 9

To send a single Program via MIDI to a different Program number:

➀Follow steps ➀ through ➂ in the instructions above.

➁Press [CURSOR ] to advance the cursor to the lower section of the display.

➂Use the [VALUE] knob to select a Program number to send the Program to.

➃Press [STORE] to transmit the data out the MIDI Out connector.

The procedure is similar for sending Mixes. Page 5 of the Store function allows you to send any one of the Mixes. In the case of storing a Mix, you may want to store each of the Programs used in the Mix. The “SEND ALL TO MIDI” command in Store mode is an easy shortcut to this (see above).

SEQUENCE PLAYBACK

Sound Bridge allows you to burn Standard MIDI sequence files on to PCMCIA cards. This allows you to play your own sequences at a live gig without taking your computer with you. See the Sound Bridge instructions on the QS CD-ROM for instructions on how to burn sequences to a card. To play back sequences from a PCMCIA card:

➀Press and hold the [MIX] button.

➁Press the [DOWN] button. The display will read:

Play CardA Seq01 <STORE>

➂Use the Value wheel to choose a sequence from either Card A or B, then press [STORE].

You can play any of the 50 sequences on a card in slot A by using the [00] through

[40] buttons, and you can play the sequences from the card in slot B by using the [50] through [90] buttons. For example to play sequence 34 from card B , press [MIX], [80], then [4]. Remember that if you write a sequence to Card A, using Programs and wave data from that card, then play it from Slot B, the sequence will still look for its data in the Card A slot.

QSR Reference Manual