Alesis QSR 64 Copying Sounds Between Programs, Copying Effects Between Programs, SOUND 2 STR

Overview: Chapter 4

COPYING SOUNDS BETWEEN PROGRAMS

Follow the steps below to copy one of the four Sound layers from one Program to another Program in the User Bank. When copying Sounds between Programs, the “new” Sound will replace the same numbered Sound in the destination Program, i.e., Sound 3 will replace Sound 3.

➀Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select the Program Number that uses the Sound you want to copy. If necessary, use the BANK SELECT [DOWN] and [UP] buttons to select a different Bank.

➁Press [STORE].

The [STORE] button will begin to flash.

➂Press [CURSOR ▲] once to advance to Page 2.

The upper section of the display will read:

COPY SOUND 1 TO

SOUND 2 (STR)

➃Use the [VALUE] knob to select which of the four Sounds (1–4) you wish to copy from the currently select Program, or to select the Program Number in the User Bank you wish to copy the Sound from (000–127).

➄Press [CURSOR ▲] once to advance the cursor to the Program number value in the lower section of the display.

➅Use the [VALUE] knob to select which of the four Sounds (1–4) you wish to copy to in the currently select Program, or to select the Program Number in the User Bank you wish to copy the Sound to (000–127). ).

➆Press [STORE] to complete the copy function.

COPYING EFFECTS BETWEEN PROGRAMS

Follow the steps below to copy the Effects Patch from one Program to another Program in the User Bank.

➀Press [PROG] to select Program Play Mode, then use the [VALUE] knob to select the Program Number that uses the Effects you want to copy. If necessary, use the BANK SELECT [DOWN] and [UP] buttons to select a different Bank.

➁Press [STORE].

The [STORE] button will begin to flash.

➂Press [CURSOR ▲] three times to advance to Page 3.

The upper section of the display will read:

COPY EFFECT	TO
PROG 000	(STR)

➃Use the [VALUE] knob to select the Effects Patch of the currently selected

Program, or any Program (000 - 127) in the User Bank to copy from.

QSR Reference Manual 11