Alesis QSR 64 manual This selects Mix Play Mode

Overview: Chapter 4

To audition Programs before overwriting them with STORE …when editing a Program in Mix Play Mode:

➀While in Mix Program Edit mode, press [PROG].

This selects Program Play Mode, retaining your edits to the Program in Mix Edit.

➁Use the BANK SELECT [DOWN] and [UP] buttons to select the User Bank. If a RAM card is inserted, use the BANK SELECT [DOWN] and [UP] buttons to select a Card Bank.

➂Use the [VALUE] knob to scroll through the Programs until you find one you wish to overwrite with the new edited Program. Take note of the number.

➃Press [MIX].

This recalls the edit buffer in Mix Mode, which contains your edited Program.

➄Press [EDIT] twice, until “PROG EDIT” appears under the MIX number in the display.

➅Press [STORE].

The top line of the display will read “Save Program to USER xxx” where XXX is a User Program number from 000—127. Optional: If the location you noted was on a RAM card, use BANK SELECT [UP] to select the Card Bank.

➆Use the [VALUE] knob to select the Program Number you noted in step 5.

➇Press [STORE] again.

The Program is now stored.

At this point your edited Program is stored, however the Mix your were auditioning before storing the Program still has the old Program number assigned (if the edited Program was saved to a different Program number location). Therefore, you need to store the Mix as well.

➈Press [MIX].

This selects Mix Play Mode.

➉Press [STORE] twice.

The Mix is now stored.

QSR Reference Manual 10