Alesis QSR 64 manual CONFIGURATION #2 2 REVERBS, Delay, Pitch, Reverb

Editing Effects: Chapter 7

CONFIGURATION #2: 2 REVERBS

AUX LEFT

AUX RIGHT

MAIN LEFT

MAIN RIGHT

FX SEND 1	DELAY	PITCH
		AMP
	DELAY 1	PITCH 1
FX SEND 2

MIX 1

REVERB

AMP

REVERB 1

AMP

AUX LEFT

AUX RIGHT

MAIN LEFT

MAIN RIGHT

MIX 3

		REVERB 2
FX SEND 3	PITCH	REVERB
		AMP
	PITCH 3	REVERB 3
FX SEND 4
		AMP
		REVERB 4

Delay 1	Pitch 1	Reverb 1
Mono delay	Mono chorus	Plate 1
	Stereo chorus	Plate 2
		Room
		Hall
		Large
		Gate
		Reverse

	Reverb 2
	Level to Reverb 1
Pitch 3	Reverb 3
Mono chorus	Plate 1
	Plate 2
	Room
	Hall
	Large
	Gate
	Reverse
	Reverb 4
	Reverb 4
	Level to Reverb 3

This Configuration differs from Configuration #1 in many ways. In this Configuration, there is only one Delay effect, two Pitch effects and two Reverb effects. Effect send 1 is routed through the mono Delay, then a stereo Pitch effect, and finally a stereo Reverb effect. Send 2 has no effects of its own, but can be routed to the same Reverb effect as send 1. Send 3 is routed through a mono Pitch effect, and then a stereo Reverb effect. Send 4 has no effects of its own, but can be routed to the same Reverb effect as send 3.

Effect send 1’s Delay, Pitch, and Reverb can feed the Mix output directly. Unlike the first configuration, however, Pitch 3 can be routed to the Mix only after passing through Reverb 3.

QSR Reference Manual 9