Alesis QSR 64 manual Understanding the Edit Buffers

Editing Mixes: Chapter 5

Effect, etc.) If a Function Group has more than one parameter, press the

[CURSOR ] button to advance the cursor in the display, and then turn the [VALUE] knob to locate a specific parameter.

Each channel of a Mix may be enabled or disabled, without changing any of its parameter settings. When a channel is disabled, its number (1 - 16) will not appear in the bottom right section of the display. You can set levels, effect levels and bus assignments, pitch transposition, keyboard ranges (if making a split or layer), and MIDI parameters for each individual channel. A Mix also uses the Effect Patch associated with one of its 16 Programs.

Here is a simplified diagram of the signal path in Mix mode.

MIDI

Input

Keyboard

Mode =

NORMAL

Pedals

			MIDI		MIDI
Pedals			Out		Output
MIDI In	Program
					Main L
Range	Sound 1	Pan	Output		Aux L
	Sound 2				Main R
	Sound 3				Aux R
Keyboard	Sound 4			Sends
				1—4	Effects
	Pitch	Effects	Effects		Processor
Channel 1		Level	Buss		(reverb, delay,
					chorus, etc.)
Channel 2
Channel 3

Channel 16

UNDERSTANDING THE EDIT BUFFERS

In Mix mode, there are 16 edit buffers (one for each channel), plus another buffer for the Mix parameters (Level, Pitch, Range, etc.), and yet another buffer for the Effects Processor. When you select a Mix from memory, it is copied into the Mix Edit buffer, the 16 Programs of that Mix are copied into the 16 edit buffers, and the Effect from one of the 16 Programs is copied into the Effects buffer. If you make changes to the Mix, they are only temporarily kept in the edit buffer until a new Mix is selected from memory. Therefore, you MUST store your edited Mix if you want to keep it.

If in the course of making a Mix, you enter Program Edit mode (by pressing [EDIT]) and edit one or more Programs in the Mix, the edits you make are entered into a separate buffer for each Program in the Mix. Note, however, that you DO have to store each edited Program into the User bank (in the same or different Program number location) before selecting a different Mix, or your changes will be lost. The same goes for editing the Effects, which will be stored along with its associated Program into the User Bank. If you select another Mix before storing, your changes will be lost.

QSR Reference Manual 2