Manuals / Allied Telesis / Computer Equipment / Switch

Allied Telesis AT-GS950/8 manual Disabling or Enabling Ping Blocking, Enabled, Disabled

Models: AT-GS950/8

1 76

Download 76 pages 23.63 Kb

Page 20

Chapter 2: Basic Switch Parameters

Disabling or Enabling Ping Blocking

You can allow the switch to respond to ping requests by setting the Ping Blocking parameter. The default setting is enabled, which means that the switch does not respond to ping requests.

To disable or enable ping blocking, perform the following procedure:

1.From the main menu, select Basic Switch Information.

The Basic Switch Information page is shown in Figure 4 on page 18.

2.For Ping Blocking, choose one of the following:

Enabled

The switch does not respond to ping requests. This is the default.

Disabled

The switch responds to ping requests. Allied Telesis recommends that you choose this setting.

3.Click Apply to implement your changes.

4.To save the settings to the configuration file, from the main menu, select Save Configuration.

The Save Configuration page is shown in Figure 3 on page 14.

5.Click Apply.

20

Image 20

Allied Telesis AT-GS950/8 manual Disabling or Enabling Ping Blocking, Enabled, Disabled

Contents

For the AT-GS950/8 Layer 2 Gigabit Ethernet WebSmart Switch Version Management SoftwareUser’s Guide AT-S82Copyright 2007 Allied Telesis, Inc Contents Tagged Port Members Figures Figures Preface ˆ “Where to Find Web-based Guides” on pageThis preface contains the following sections ˆ “Contacting Allied Telesis” on pageWhere to Find Web-based Guides PrefaceOnline Support Email and Telephone Support Warranty Returning Management Software UpdatesContacting Allied Telesis Products Sales or Corporate InformationPreface Getting Started ChapterStarting a Management Session Figure 2. Main Page AT-S82 Management Software User’s GuideSaving Changes Quitting a Management Session To quit a management session, close the web browserChapter 1 Getting Started Basic Switch Parameters ChapterTo set the switch’s IP configuration, perform the following procedure a. In the IP Address field, enter the IP address. The default is Disabling or Enabling Ping Blocking EnabledDisabled Disabled Enabling or Disabling 802.1X Forwarding ControlEnabled Changing the Administrator’s Password Rebooting the Switch Resetting the Switch and Retaining the IP Address Figure 8. Reset System Page 2. Click Apply Downloading New Firmware Port Configuration ˆ “Configuring Port Parameters” on pageChapter This chapter contains the following sectionConfiguring Port Parameters 3. From the State list, choose one of the following EnabledDisabled Copper FiberEnabled DisabledTrunking ChapterTrunking Overview Trunking Guidelines Trunking Algorithmdistribution methods ˆ MAC-SA - source MAC address ˆ MAC-DA - destination MAC addressˆ DAxorSA - destination MAC address/source MAC address AT-S82 Management Software User’s GuideConfiguring the Trunking Algorithm MAC-SAMAC-DA DAxorSASetting up the Trunk 5. Click Apply to implement your changes Port Mirroring ChapterPort Mirroring Overview Configuring Port Mirroring Chapter 5 Port Mirroring VLANs ChapterVLAN Features Increased Performance Improved Manageability Increased SecurityAT-S82 Management Software User’s Guide VLAN Overview VLAN Identifier VLAN Port MembersIncoming and Outgoing Tagged and Untagged Frames Tagged Port MembersUntagged Port Members Incoming FramesGuidelines for Creating a VLAN Working with VLANs Displaying all VLANs 2. Click Show All Static VLAN EntriesModifying a VLAN Deleting a VLAN Protected Ports VLAN Figure 21. Protected Port Page 2. Determine which ports will be the Primary portsThe box for the Primary ports should be empty 4. Click Apply AT-S82 Management Software User’s GuideChapter 6 VLANs Class of Service ChapterClass of Service Overview Mapping Ports to Egress QueuesIEEE 802.1p Priority Level Port Priority QueuePort Egress Queue Maximum Number ofPackets exampleMapping Priorities to Queues Setting Up the Schedule Assigning Priority to Ports Chapter 7 Class of Service Spanning Tree Protocol STP ChapterSpanning Tree Overview Bridge Priority and the Root BridgePath Costs and Port Costs IncrementBridge PriorityPort Speed Port CostPort Speed Port CostForwarding Delay and Topology Changes Port PriorityPort Port SpeedHello Time and Bridge Protocol Data Units BPDUs Point-to-Point and Edge Ports Figure 26. Edge Port Spanning Tree and VLANs Chapter 8 Spanning Tree Protocol STP Configuring Spanning Tree RSTP STP CompatibleWhen you select a value for maximum age, observe the following rules EnabledDisabled Disabled Configuring STP Port SettingsEnabled False TrueAuto FalseChapter 8 Spanning Tree Protocol STP