Chapter 4: Trunking
Configuring the Trunking Algorithm
To configure the trunk load method, perform the following procedure:
1.From the main menu, select Trunking Algorithm. The Trunking Algorithm page is shown in Figure 12.
Figure 12. Trunking Algorithm Page
2.Choose one of the load methods from the list:
By the source MAC address.
MAC-DA
By the destination MAC address.
DAxorSA
Using either the destination MAC address or source MAC address.
3.Click Apply to implement your changes.
4.To save the settings to the configuration file, from the main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 14.
5.Click Apply.
34
