AT-S82 Management Software User’s Guide

This parameter is used as a tie breaker when two or more ports are determined to have equal costs to the root bridge. The range is 0 to 240 in increments of 16. The default value is 8 (priority value 128). For a list of the increments, refer to Table 8, “Port Priority Value Increments” on page 65.

6.From the Migration list, select one of the following:

No

Disallows resetting an RSTP port to handle STP BPDUs. This is the default setting.

Yes

Resets an RSTP port, allowing it to send RSTP BPDUs. When an RSTP bridge receives STP BPDUs on an RSTP port, the port transmits STP BPDUs. The RSTP port continues to transmit STP BPDUs indefinitely

7.From the Edge list, select one of the following:

False

The port does not function as an edge port.

True

Makes the port an edge port.

Note

Aport can be both a point-to-point and an edge port at the same time

8.In the P2P list, select one of the following:

Auto

The switch automatically detects if the port is functioning as a point-to- point port.

False

Sets the port to never function as a point-to-point port.

True

Sets the port to always function as a point-to-point port.

9.Click Apply.

10.To save the settings to the configuration file, from the main menu, select Save Configuration.

The Save Configuration page is shown in Figure 3 on page 14.

11.Click Apply.

75

Page 75
Image 75
Allied Telesis AT-GS950/8 manual Yes, False, True, Auto