Chapter 4: Trunking
3.For the Group ID, choose a trunk group ID from the list. IDs from 1 through 4 are available. Note that when you choose a group ID that ports are automatically selected on the Port Map. You cannot designate any other ports for the trunk
4.For the State, choose the state of the trunk, either enabled or disabled.
Note
Ignore the Master Port field. The Active Port field displays which ports in the trunk have established an active link. The Flooding port field displays the lowest active port in the trunk pair.
5.Click Apply to implement your changes.
6.To save the settings to the configuration file, from the main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 14.
7.Click Apply.
36
