Configuring Port Mirroring
To configure the trunk load method, perform the following procedure:
1.From the main menu, select Port Mirroring. The Port Mirroring page is shown in Figure 15.
Figure 15. Port Mirroring Page
2.From the Target Port list, select the target port.
This is the port where you will connect the network analyzer and the port to which traffic will be mirrored.
3.From the Status list, choose Enabled.
4.In the table, choose one of the following options for the mirrored (source )port:
RX - Mirrors only received traffic. TX - Mirrors only transmitted traffic.
Both - Mirrors both received and transmitted traffic.
5.Click Apply to implement your changes.
6.To save the settings to the configuration file, from the main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 14.
7.Click Apply.
39
