Alps Electric MD-5000P manual ¨ Prepare the Image to Be Printed

Various Printing Operations

Step 1¨ Prepare the Image to Be Printed

Use an application and create the data to be printed.

There are no special considerations for creating the data. Create the data just as you would for black or full color printing.

Note

∙Because each iron-on transfer sheet can only be printed on once, try to use as much of the sheet as possible. If a 1/2 inch gap is left between images, several images can be printed on a single sheet. (Use a single sheet to create an image for several different pieces of cloth.)

∙Large images that require more than one sheet can also be created.

Step 2¨ Install the Ink Cartridges and Load the Iron-On Trans- fer Sheet into the Printer

1.Install the ink cartridges into the ink cartridge holders.

Note

When printing on iron-on transfer sheets, use only standard color cyan, magenta, yellow, or black ink cartridges. Do not use me- tallic ink cartridges.

2.Set the paper feed switch to position "M".

3.Insert the iron-on transfer sheet into the printer.

Insert the iron-on transfer sheet into the printer with the print- ing side up.

4.Adjust the paper feed guide to the paper size.

5.Press the ready / insert button, while holding the paper so that it will not fall.

83