C H A P T E R 2

System & Network Requirements

System Requirements

AltiWare OE 4.5A or higher

Note: A lower version of AltiWare may cause the IP phone to lose several advanced features, resulting in use as a very basic H.323 phone.

AltiGen OE 4.5A Gatekeeper or higher (to support Plug and Play functionality)

Network Requirements

Network connection — the IP phone must have TCP/IP connection to the related AltiWare system

Important:Make sure a switch is used, rather than a hub, in the corporate LAN.

DHCP Server (to get dynamically IP address when necessary)

TFTP Server (to update the IP phone firmware when necessary)

GATEKEEPER (for Plug and Play feature)

AltiAdmin/ACM Admin Configuration Requirements

The Alti-IP 600H requires a virtual extension to be created as an IP extension in AltiAdmin to handle call processing. Refer to the “Setting Up IP Extensions” chapter in the AltiWare OE/ACC System Installation & Administration Manual or ACM System Administration Manual for detailed instructions on how to set up an IP Extension to manage the IP phone.

The IP Phone settings must be pre-configured in AltiAdmin/ACM Admin before setting up configuration for the Alti-IP 600H.

Alti-IP 600H Manual 7

Page 17
Image 17
AltiGen comm 600H manual System & Network Requirements, System Requirements, AltiAdmin/ACM Admin Configuration Requirements