Installation, Manual Setup | AltiGen comm 600H guide

C H A P T E R 3

Installation

These steps describe procedures for installing and configuring the Alti-IP 600H locally — through manual setup or plug and play. To install and configure the phone remotely, refer to “Remote Installation” on page 18.

Manual Setup

To manually set up the Alti-IP 600H phone, perform the following steps:

1.Network Setup

Find out the settings for the following (this information will be needed later to configure the Alti-IP 600H):

•AltiWare Server IP Address

•DHCP - if DHCP is not used, obtain the Alti-IP 600H phone’s IP address from the System Administrator.

•Gatekeeper Auto Discovery - if gatekeeper auto discover is not used, obtain the AltiWare IP address.

•Firewall - Refer to “Firewall Considerations” on page 40.

2.AltiAdmin/ACM Admin Setup - AltiGen IP Phone Configuration Window

To configure the Alti-IP 600H phone with AltiAdmin/ACM Admin, select AltiGen IP Phone Configuration from the Management menu.

Alti-IP 600H Manual 9

Image 19

AltiGen comm 600H manual Installation, Manual Setup

Contents

Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual What The Warranty Covers Warranty Effect of State Law Overview Preface About This Manual Related Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed New in Version Level Hardware Components Headset port support Call Record Alti-IP 600H Manual Network Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem & Network Requirements System Requirements Normal Operation AltiGen IP Phone ServicePlug and Play Feature Basic Mode Manual Setup Installation IP Phone Configuration Window Parameter Description Demand to Extension VM must be enabled in the Personal Configuration screen on the General page, Record on Tftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Before IP Phone is Started Plug and Play Setup Plug and Play Setup After IP Phone is Started Remote Installation Verifying the Phone Startup Process Resolving Errors Upon Startup Rebooting the Alti-IP 600H Restoring Default SettingsConfiguring Phone Setting Soft Keys Headset Port Support Dialing an IP Number Directly from the Alti-IP 600H Operation Notes System Settings Configuring Phone SettingsSetting Menu Path Sub Menu Description Network Settings Enabling Dhcp Modifying Dhcp Settings Disabling Dhcp Configuring IP SettingsAssigning a Local IP Address Updating Phone Firmware Assigning a Tftp Server SystemVersion Info Setting Ring Tones Configuring NATAssigning NAT Press * * 6 Enter Workgroup Status Display FWD forwarding Activity Display Alti-IP 600H Manual Go to AltiGen IP Phone Feature Description Configuration NotesConfiguration on Phone Functions VM in the Personal Call Extension ConfigurationTo AltiGen IP Phone Record Headset Call Line button ParkLED for Parked Call Line Then, go to AltiGen IP Phone Configuration Station Speed Alti-IP 600H Manual Appendix a Specifications Firewall Considerations TroubleshootingClient Server Contact AltiGen Technical Support Problem/Symptom Solution Troubleshooting Message Definition Local Menu Configuration MessagesLCD Messages Alti-IP 600H/600PH Running Messages LCD Messages User Reference IP Phone Boot Messages User Reference Configuration BLF Feature Codes Call Management Dual Tone Multi Frequency see Dtmf Glossary Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual