User Reference, IP Phone Boot Messages | AltiGen comm 600H manual

Appendix A

WRONG PASSWORD!

Registration failed because of invalid extension password.

IP Phone Boot Messages

The following messages may be displayed in the LCD when booting the Alti-IP 600H/600PH:

Message	Definition

CHECK FW	Checking firmware.

CHECK MEMORY	Checking memory.

INIT NETWORK	Initializing network.

LOAD FAILED	Failure to load the image into memory.

NETWORK FAILED.	Network initialization failed.

TFTP FAIL!	Failure downloading TFTP.

UPDATE FAILED.	Firmware update failed.

UPDATE OK	Firmware update successful.

update APP(S1)	Appears when Boot Download is set to TRUE. The Alti-
	IP 600H/600PH will show this message when it is
	rebooted.

User Reference

Basic Phone Operation

*indicates a normal operating mode phone feature, which is only available after registering the Alti-IP 600H with the phone server and logged in as an extension.

FUNCTION	KEY SEQUENCE

Auto Answer	1)	Press * * 6, then ENTER button.
	2)	Use the navigation buttons to enable/disable Auto Answer
	mode, set number or seconds to ring before answering (1-20),
	and select from speaker or headset as the Auto Answer device.

Alti-IP 600H Manual 45

Image 55

AltiGen comm 600H manual User Reference, IP Phone Boot Messages

Contents

Administration Manual Trademarks Contents Configuring Phone Settings Glossary Index Alti-IP 600H Manual What The Warranty Covers Warranty Effect of State Law Overview Preface About This Manual Related Documentation An Overview of the Alti-IP 600H Alti-IP 600H, Top View Lamp Field key, an AltiServ feature code, a speed New in Version Level Hardware Components Headset port support Call Record Alti-IP 600H Manual Network Requirements AltiAdmin/ACM Admin Configuration RequirementsSystem & Network Requirements System Requirements Normal Operation AltiGen IP Phone ServicePlug and Play Feature Basic Mode Manual Setup Installation IP Phone Configuration Window Parameter Description Demand to Extension VM must be enabled in the Personal Configuration screen on the General page, Record on Tftp To connect the Alti-IP 600H Configuring the AltiWare IP Settings Plug and Play Setup Before IP Phone is Started Plug and Play Setup Plug and Play Setup After IP Phone is Started Remote Installation Verifying the Phone Startup Process Resolving Errors Upon Startup Rebooting the Alti-IP 600H Restoring Default SettingsConfiguring Phone Setting Soft Keys Headset Port Support Dialing an IP Number Directly from the Alti-IP 600H Operation Notes System Settings Configuring Phone SettingsSetting Menu Path Sub Menu Description Network Settings Enabling Dhcp Modifying Dhcp Settings Disabling Dhcp Configuring IP SettingsAssigning a Local IP Address Updating Phone Firmware Assigning a Tftp Server SystemVersion Info Setting Ring Tones Configuring NATAssigning NAT Press * * 6 Enter Workgroup Status Display FWD forwarding Activity Display Alti-IP 600H Manual Go to AltiGen IP Phone Feature Description Configuration NotesConfiguration on Phone Functions VM in the Personal Call Extension ConfigurationTo AltiGen IP Phone Record Headset Call Line button ParkLED for Parked Call Line Then, go to AltiGen IP Phone Configuration Station Speed Alti-IP 600H Manual Appendix a Specifications Firewall Considerations TroubleshootingClient Server Contact AltiGen Technical Support Problem/Symptom Solution Troubleshooting Message Definition Local Menu Configuration MessagesLCD Messages Alti-IP 600H/600PH Running Messages LCD Messages User Reference IP Phone Boot Messages User Reference Configuration BLF Feature Codes Call Management Dual Tone Multi Frequency see Dtmf Glossary Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Alti-IP 600H Manual Index DSL Alti-IP 600H Manual