Alto-Shaam 1200-TH/III OPE R A Ti o n, user options, Preset Keys Lock and Unlock, A B C D E F G H

Models: Cook, Hold, Smoke Oven Deluxe Control 1767-SK/III 1000-SK/III 300-TH/III 1200-SK/III 767-SK/III 1200-TH/III 500-TH/III 750-TH/III 1000-TH/III

1 59
Download 59 pages 13.69 Kb
Page 23
Image 23
user options

OPE R A Ti o n

user options

A B C D E F G H I

Preset

Lock

Preset Keys Lock and Unlock

Preset Keys A through H can be locked in order to prevent storing, altering or erasing a program.

To lock the preset keys, press and hold the “I” Key until the oven beeps. Release the “I” key. The green indicator on the “I” key will illuminate. Oven Preset Keys A through H are now locked.

Note: Only the oven Preset keys A through H are affected by this lock-out in order to also allow the oven to be used with the unprogrammed Cook, Probe, or Hold modes.

To unlock the preset keys, press and hold the Cancel Key along with the “I” Key for

two seconds until the “I” key light no longer illuminates. Release all keys. The oven preset keys are now unlocked.

Control Panel Lock and Unlock

The control panel can be locked at any time in order to prevent inadvertent or accidental setting changes.

To lock the control panel, press and hold the

Up Arrow Key and then press the on/off Key. You will hear a brief beep and the panel lock indicator will illuminate. Release all keys.

The oven’s control panel is now locked.

Note: The control panel is now fully locked with the exception of the on/off Key and Arrow keys. You will be unable to turn the oven control off at this point.

To unlock the control panel, press and hold the Down Arrow Key and then press the on/off Key. You will hear three beeps and the panel lock indicator will extinguish. Release all keys. The panel is now unlocked and ready for normal use.

Fahrenheit or Celsius Selection

With the control in the off mode,

press and hold the Up Arrow Key until the display shows the current selection. Press

the up or down buttons to toggle between the two options. After each change the

button must be released. The display must clear before the procedure can be repeated.

Beeper Volume Selection

With the control in the off mode,

press and hold the Down Arrow Key until the display shows the current control volume. Press the Up or Down Arrow Key to cycle through the four options

(0 = Off, 1 = Low, 2 = Mid, 3 = High).

MN-29758 (Rev. 4) • TH/III & SK/III installation/operation/service manual

pg. 21

Page 23
Image 23
Alto-Shaam 1200-TH/III manual OPE R A Ti o n, user options, Preset Keys Lock and Unlock, Control Panel Lock and Unlock