INSTALLATION
GAS SUPPLY & INSTALLATION
The
GAS SPECIFICATIONS
| NATURAL GAS | PROPANE GAS |
6•10esG | 45,000 Btu/hr. | 45,000 Btu/hr. |
10•10esG | 68,000 Btu/hr. | 68,000 Btu/hr. |
7•14esG | 91,000 Btu/hr. | 88,000 Btu/hr. |
10•20esG | 105,000 Btu/hr. | 105,000 Btu/hr. |
12•18esG | 105,000 Btu/hr. | 105,000 Btu/hr. |
20•20esG | 190,000 Btu/hr. | 170,000 Btu/hr. |
DANGER
CONNECTING TO THE WRONG GAS SUPPLY COULD RESULT IN FIRE OR AN EXPLOSION CAUSING SEVERE INJURY AND PROPERTY DAMAGE.
WARNING
TO AVOID SERIOUS PERSONAL INJURY, installation of this appliance must conform to local, state, and national codes; the current edition of the American National Standard Z223.1, National Fuel Gas Code, and all local municipal building codes.
In Canada, installation must be in accordance with Standard CAN/CSA B 149.1 and Installation Codes - Gas Burning Appliances, and local codes.
INSTALLATION REQUIREMENTS
GAS CONNECTION: 3/ 4” NPT
CHECK PLUMBING CODES FOR PROPER SUPPLY LINE SIZING TO ATTAIN MINIMUM BURNER MANIFOLD PRESSURE SHOWN:
NATURAL GAS: 3.5” W.C.
PROPANE GAS: 5.6” W.C.
MAXIMUM INLET PRESSURE: 14” W.C.
NOTE: If a flexible gas line is used, it must be AGA
approved, commercial type and at least 3/4” I.D.
HOOD INSTALLATION IS REQUIRED
GAS VALVE MAY REQUIRE FIELD ADJUSTMENT ABOVE 2,000’ (610m) AND IS NOT ADJUSTED AT THE FACTORY.
GAS PRESSURE CHART
The oven has been factory adjusted according to the gas type specified on the identification name plate.
TECHNICAL SPECIFICATIONS
Natural Gas
Min. Connected Pressure | 5.5” W.C. | 1.12 kPa | |
|
|
|
|
Max. Connected Pressure | 14.0” W.C. | 3.5 kPa | |
|
|
|
|
Propane Gas |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
Min. Connected Pressure | 9.0” W.C. | 1.99 kPa | |
|
|
|
|
Max. Connected Pressure | 14.0” W.C. | 3.5 kPa | |
|
|
|
|
COMBITOUCHTM ESG SERIES • GAS INSTALLATION MANUAL • 16.