Starting 3DM and Logging In

Logging In to the 3DM Web Application

When the 3DM process is running in the background, you can log into the 3DM application pages using a browser.

Two levels of access are provided:

Users can check the status of the controller, units, and attached drives.

Administrators can check status, configure, and maintain the units and drives on the 3ware controller.

Note: Administrator and User status in 3DM is not related to Administrator/User settings in the operating system.

To log in to the 3DM web application

1You can start the 3DM 2 web application in one of the following ways:

In the Finder, choose Applications > AMCC, and then double-click

Connect to 3DM2.webarchive.

Your browser will open and go to the URL for 3DM 2.

OR

Open your browser and enter the URL for your system. The default URL is https://localhost:888/

You can also replace “localhost” with the IP address of the computer that contains the 3ware controller. For example:

https://<IP address>:888/

Note: If you receive a page not found message, make sure you entered the URL correctly. If you did, 3DM may not be running in the background. You can start it manually, as described under “Starting 3DM on the Macintosh” on page 75.

2The first time you start 3DM, when the security certificate message displays, click Show Certificate and accept the certificate so that you do not see the security message each time you start 3DM.

Figure 5. Security Certificate Message from Browser

www.3ware.com

17

Page 25
Image 25
AMCC 720-0138-00 manual Logging In to the 3DM Web Application, To log in to the 3DM web application