AMCC 720-0138-00 manual Creating a Unit, To create a unit

Configuring a New Unit

Creating a Unit

In 3DM, creating a unit starts from the Management > Maintenance page (Figure 12).

Figure 12. 3DM Maintenance Page

To create a unit

1In 3DM, choose Management > Maintenance.

2In the Available Drives list, select the drives you want to include in the unit by marking the checkbox in front of the Port number for each one.

If you are creating single drive units (single disks or hot spares), you can configure multiple drives at once.

3Click Create Unit.

A window similar to the one below shows the drives you selected, and lets you specify configuration settings.

Figure 13. Configuring a Unit in 3DM

www.3ware.com 37