www.3ware.com 3
Initial Settings for Policies and Background Tasks

The table below lists the default settings for policies. These settings are used

if you do not explicitly change the policy settings.

Table 2: Default Settings for Policies and Background Tasks

Policy Default Value Where to Change
Controller-Level Settings
Auto Rebuild Enabled 3DM, CLI
Auto-Carving Disabled 3DM, CLI
Carve Size or Factor 2048 GB 3DM, CLI
Unit-Level Settings
Auto Verify Disabled 3DM, CLI
Continue on Source Error
During Rebuild Disabled 3DM, CLI
Queuing (NCQ) Disabled 3DM, CLI
StorSave Profile Protection 3DM, CLI
Write Cache Enabled 3DM, CLI
Background Task Settings
Verify Task Schedule Window Daily, starting at 12:00 am
and running for 24 hours 3DM, CLI
Follow Verify Task Schedule No 3DM, CLI
Rebuild Task Schedule
Window Daily, starting at 12:00 am
and running for 24 hours 3DM, CLI
Follow Rebuild Task
Schedule No 3DM, CLI
Self-test Task Schedulesa
a. Although the default Self-test Task Schedule is for 24 hours, self-test
tasks are run only at the beginning of that time period and take just a few
minutes. For more information about task schedules, see “Scheduling
Background Tasks” on page76.
Daily, starting at 12:00 am
and running for 24 hours 3DM, CLI
Follow Self-test Task
Schedule Yes 3DM, CLI